PPC is now available for Volvo XC60

The programming is performed by BSR in Växjö. Leave your car here, or send the ECU via your BSR dealer, and you will get the PPC-unit immediately.

PPC increases power and torque to:
220Hp/455Nm


go to tuning kit XC60 2.4D
go to tuning kit XC60 D5


PPC vs "diesel-box"?

BSR diesel tuning = real optimization!
If you want to tune your diesel car and still keep the car’s safety and durability functions for the engine/transmission/ESP etc intact, the only way to tune a diesel car is to make changes in the existing control system of the engine. That is exactly what we are doing with the PPC. With PPC we have total control over all parameters at any moment, and we don’t disturb the safety functions of the car by deceiving the system.

Apart from an obvious power and torque increase you get the following advantages with PPC Tuning System:

- PPC does not need to be connected to the car after tuning
- no loose boxes and flexes in the engine compartment
- torque comes soft and smooth
- torque is adjusted/limited on lower gears (to avoid damage on the transmission)
- boost pressure and air flow is optimized
- reinstall original settings and vice versa takes only a few minutes
- on board computer shows correct fuel consumption
- anti skid program (ESP) function is fully retained
- torque reduction when shifting gear (for comfort and durability) is retained
- regeneration (emptying) of particle filter is retained optimal
- correct calculation of exhaust temperature
- correct calculation of service interval
- diagnostic system is retained
- no enlarged NOx emissions compared with original when driving in regulated emission tests